Vibe EtherMPX
STL over IP · MPX & Stereo · Windows & Linux

Send MPX over the network.

Vibe EtherMPX sends your station's live signal from the studio to the transmitter site over any network — wireless, fiber, 4G/5G or the internet. It carries the full MPX composite (pilot, stereo, RDS) or stereo L/R, with low latency and protection against dropouts.

› MPX 192 kHz
› Stereo Tool built in
› Backup & failover
› RTP or STL
› RDS
The link

One link: studio → transmitter site

A computer at the studio (encoder) sends the signal; a computer at the transmitter site (decoder) feeds it from the sound card into the FM exciter. A software alternative to expensive hardware IP codecs.

STUDIO Console L/R or MPX ENCODER Vibe EtherMPX + Stereo Tool LAN · wireless 4G/5G · internet IP DECODER Vibe EtherMPX MPX 192 kHz TRANSMITTER SITE FM exciter MPX in → antenna

Only one 192 kHz sound card is needed — on the decoder/transmitter side.

Features

Everything a professional link needs

From carrying the composite to protecting against dead air — all in one program, with a graphical interface and real-time metering.

MPX end to end

The full composite at 192 kHz, 24- or 16-bit, uncompressed — 19 kHz pilot, 38 kHz stereo and 57 kHz RDS reach the exciter intact.

Stereo Tool built in

Takes L/R from the console and does processing, stereo encoding, RDS and composite clipping — producing ready MPX. Only one 192 kHz card.

Low latency

Adjustable packet size from 0.1 ms and jitter buffer in milliseconds. ASIO exclusive support for bit-perfect, low-latency input.

Clock lock · stable pilot

Adaptive clock recovery with a LOCK indicator and correction in ppm/Hz of the pilot — so the pilot stays within spec. Warning if it doesn't lock.

Loss resilience

Redundancy (with auto), FEC, proactive adaptive jitter buffer and crossfade concealment — smooth audio even when the network drops packets. Automatic reconnection.

RDS at the decoder

Shows PS, PI, RadioText, PTY, TP-TA and Music/Speech, along with reception quality — groups per second and block error rate.

Backup & silence alarm

If MPX is lost, the decoder automatically switches to a backup source (stream, sound card or local playlist) and returns on its own. A silence alarm that runs your own command.

Many input sources

Sound card, system loopback, local file or playlist folder, or HTTP stream from Shoutcast/Icecast — ideal even for a fully remote studio.

Streaming output · up to 5 streams

Up to 5 independent MP3 streams at once to Shoutcast/Icecast — each with its own server, bitrate and metadata. Main + backup or different bitrates, with no second machine.

"Now playing" from a file

Like RDS on FM, but for the web stream: reads the song title from a file (Jazler, RadioBOSS, SAM) every 2s and sends it to listeners as soon as it changes — separately per stream.

RTP protocol (optional)

Besides STL, the encoder can send the audio as RTP (raw PCM, L16/L24). The decoder auto-detects it — no setup. For compatibility with gear that expects RTP.

Recording

Automatic recording to MP3 or WAV — a new file every hour on the round hour, a subfolder per day and automatic deletion of old files, for an air-check archive.

Network analysis & logging

Loss before/after correction, bursts, jitter, late packets, availability (SLA) — with charts, configuration suggestions and logging to a file.

Studio metering

Peak meters with peak-hold, loudness ITU-R BS.1770 (Momentary / Short-term / Integrated) and MPX spectrum 0–96 kHz with pilot/stereo/RDS markers.

Unicast & Multicast · QoS

Send to one decoder (unicast) or many at once (multicast, IGMP), with DSCP 46 (EF) priority marking for the network.

Windows & Linux · GUI + CLI

The same code runs on both: WASAPI/ASIO exclusive on Windows, ALSA on Linux, with realtime priority. Auto-start for the transmitter computer.

The interface

Clean, with everything in front of you

Two programs — encoder and decoder — with the same modern interface. Every control has a tooltip, and all metering updates live. Click an image to enlarge.

Compare

Versus a hardware IP codec

The same professional capabilities, in software running on an ordinary computer.

FeatureVibe EtherMPXHardware IP codec
MPX composite192 kHz · 24-bit192 kHz · 24-bit
Stereo L/Ryesyes
Packet size0.1–2.4 ms1.25–2.5 ms
Jitter bufferadjustable + adaptiveadjustable
Redundancy / FEC / concealmentyespartial
Stereo Tool processingbuilt inexternal processor
ProtocolSTL or RTPvaries
Streaming output (Shoutcast/Icecast)up to 5 streams—
"Now playing" from a fileyes—
Recording & network analysisyespartial
Platformsoftware · Windows & Linuxdedicated hardware
Hardwareordinary mini-PC + sound carddedicated device
Specs

At a glance

MPX
192 kHz 24/16-bit · ~4.6 Mbps
Stereo
L/R 48 kHz or any rate
Packet
0.1–2.4 ms adjustable
Network
Unicast / Multicast DSCP 46 (EF) QoS
Protocol
STL or RTP auto-detected
Streaming
Up to 5 streams Shoutcast / Icecast
Transport
LAN · wireless 4G/5G · internet
Windows
WASAPI / ASIO exclusive mode
Linux
ALSA SCHED_FIFO realtime
Interface
GUI + CLI desktop + terminal